: "avinash1626" <avinash1626@yahoo.com>
: <mt13x9@yahoogroups.com>
: [mt13x9] Re: New MTK MPEG Card
: 29  2008 . 12:02

--- In mt13x9@yahoogroups.com, "New Age" <new_age@...> wrote:
>
> Hello!
> 
> 1) try entering setup and then press '0' after that rs232 may work
> 
> 2) just uploaded my latest mt1389 flasher tool that supports 
serial flash read/write (at least it works with 89L having AMIC 
serial flash)
> 
> if (1) is not working there is another way (for my 89L with AMIC 
A25L80P it worked):
> 
> - unplug player from 230V
> - connect serial flash "Chip Select" and "Ground" pins (usually 
pin 1 and pin 4) 
> - plug player into 230V
> - wait around 5 sec
> - disconnect serial flash pins
> - start flasher read/write


1) in your second method i have to connect all 8 pins of eprom first 
and then disconnect pin i and pin 4.
2)plaese tell me this method in detail.
3) this method works with EN25F80??

Reply it Soon
Thanks....





<b>
 